PrintAn
Investigation of the Flow Distribution Inside a Radial
Sidestream Inlet of a Centrifugal Compressor (Abstract -
TP051)
Zheji Liu - D. Lee Hill - Gary
Colby
An Impeller Dynamic Risk Assessment Toolkit (TP151)
Donald M. Schiffer - Asadullah Syed
Benefiting
from Efficiency Improvements to Gas Compression (TP010)
Dresser-Rand Technical Staff
Computational
Modeling of Turbulent Flows Over Rough Surfaces (TP070)
Gocha
Chochua - Wei Shyy
Damper
Seal Comparison in a High-Pressure Re-Injection
Centrifugal Compressor During Full-Load, Full-Pressure
Factory Testing Using Direct Rotordynamic Stability
Measurement (TP069)
J.
Jeffrey Moore - Thomas Soulas
Design,
Operation, and Maintenance Considerations for Improved
Dry Gas Seal Reliability in Centrifugal
Compressors (TP134)
Dresser-Rand Technical Staff
Dynamic
Evaluation of a Three-Point Mount Base Plate for a Motor
Driven Centrifugal Compressor Package (TP068)
Joseph
Kubany - Joseph Tecza - Per Gustafsson
Experimental
and Computational Study of a Radial Compressor Inlet
(TP103)
Dresser-Rand Technical Staff
Experimental
Results on a Rotatable Low Solidity Vaned Diffuser
(TP043)
Dresser-Rand Technical Staff
Investigation
of the Cirumferential Static Pressure Non-Uniformity
Caused by a Centrifugal Compressor Discharge Volute
(TP001)
Dresser-Rand Technical Staff
Noise
Reduction of a Multistage Export / Reinjection
Centrifugal Compressor Through the Use of Duct Resonator
Arrays (TP081)
Zheji Liu - Mark Kuzdzal - Einar Flood Jr.
On
Reducing Piping Vibration Levels - Attacking the Source
(Abstract - TP046)
Zheji Liu - D. Lee Hill - Roman
Motriuk
On
the Use of 5-Hole Probes in the Testing of Industrial
Centrifugal Compressors (TP073)
José
Gilarranz - Jason Kopko - Andrew Ranz - James Sorokes
Optimizing
Peak Efficiency and Flow Range in Pipeline Centrifugal
Stages (TP080)
José
Gilarranz - Jason Kopko - Andrew Ranz - James Sorokes
Performance
Evaluation and Fluid Flow Analysis in Low Flow Stages of
Industrial Centrifugal Compressor (Abstract TP056)
Y.
I. Biba - D. A. Nye - Z. Liu
Power
Turbine Life Assessment (TP004)
Dresser-Rand Technical Staff
Range
Versus Efficiency - A Dilemma for Compressor Designers
and Users (TP071)
James
Sorokes
Recent
Experiences In Full Load, Full Pressure Shop Testing of
a High Pressure Gas Injection Centrifugal
Compressor (TP100)
Dresser-Rand Technical Staff
Reducing
Compressor Station Ambient Noise Level by Controlling
Compressor Internal Noise Source (Abstract - TP048)
Zheji
Liu - Bill Jahnke - Mike Marczak - Paul Kiteck
Rotordynamic
Stability Measurement During Full-Load, Full-Pressure
Testing of a 6000 PSE Re-Injection Centrifugal
Compressor (Abstract - TP047)
J.
Jeffrey Moore - Stephen T. Walker - Mark J. Kuzdzal
Sectional
Modeling of a Centrifugal Compressor (TP054)
D.
L. Hill
Statistical
Analysis of Damper Seal Clearance Divergence and Impact
Upon Rotordynamic Stability (TP076)
J. Tecza - T. Soulas - T. Eldridge
Three-Dimensional
CFD Rotordynamic Analysis of Gas Labyrinth Seals (TP055)
J. J. Moore
Totally
Enclosed Inline Electric Motor Driven Gas
Compressors (TP013)
Harry
Miller - Markus Ahrens - Anders t. Johnson - T. Kenton
Flanery